Catalog

For the recovery of gasoline vapors in tank truck loading at bulk terminals and in tank truck unloading at service stations

Construction -
Tube: Transparent Polyurethane
Cover: Transparent Polyurethane
Reinforcement: Red rigid Pliovic® helix, with static wire placed between the tube and cover

Temperature: -30 ºF to 150 ºF (-34 ºC to 66 ºC)

Hose Assemblies
We can build hose assemblies in almost any configuration. Hydrostatic certification, banded or crimped ends are available. Please contact our parts department for pricing.

For collecting gasoline vapors during loading and unloading of tank vehicles

Construction -
Crushproof and non-kinking plastic spiral with smooth interior for maximum flow. No shrinkage under high vacuum. Extremely lightweight and flexible.
Color - Gray/Black - Non Static Conductive
Color - Solid Black - Static Conductive Material


Sold in 50 foot lengths coupled or uncoupled.
We highly recommend using the TTSCUFF2 hose cuff and the TTSCUFFGLUE on ends when making these hose assemblies.

Hose Assemblies
We can build hose assemblies in almost any configuration. Please contact our parts department for pricing not listed.

Hose is softwall and will slip over 3 inch or 4 inch pipe and can be used for connection between tank compartment vents on dome lid and turn over rail (3.5), or to connect vapor pipes descending from top of tank truck or trailer (3.5 or 4.5). Nitrile tube will handle gasoline vapors. Durable heat, ozone, and abrasion resistant cover. Better known as Wet Exhaust or Marine Exhaust Hose.

Construction -
Tube: Extruded specially compounded Nitrile.
Reinforcement: Textile.
Cover: Specially compounded Nitrile.

Screws onto TTS 2" Special PVC Vapor Recovery Hose. We highly recommend installing with TTSCUFFGLUE. Vapor hose end can then be inserted and banded with one band.