Print Back

3" WET-R-DRI VLV AL/BUNA E-COATED  This valve has tapped holes, no lever or actuator, and is used to replace a bad valve using your existing metering handle or pneumatic/hydraulic actuator. Black epoxy coating is recommended for water applications but is very popular all around as it extends the life of the valve.

Unit of Measure

Specifications

Style

N/A Tapped for Actuation

Package Type

N/A Each

Units Per Package

N/A 1

Size

N/A 3 "

Body Material

N/A Epoxy Coated Aluminum

Disc

N/A Buna-N

Vendor Item #

N/A WD306ALB024

Manufacturer

N/A Betts

Weight

N/A 4 lb

Maximum Working Pressure

N/A 75 psi

Operating Temperature Range

N/A -40 to +240 ºF

Installation

N/A The Wet-R-Dri Valve may be mounted in any position with handle located for easy operation. Valve, as assembled, opens by turning handle 1/4 turn counter clockwise (right hand operation). If clockwise rotation is desired (left hand operation) please specify. Care should be taken when mounting valve to be sure the I.D. of adjoining flanges or pipe is large enough to allow disc of valve to open freely.

Qty Req'd for Discount

N/A 4

% Discount at Checkout

N/A 6 %

Warning

N/A Use only genuine Betts Industries Inc. replacement parts. Use of substitute parts can impair the proper functioning of the Wet-R-Dri Valve.

Note

N/A Standard drilling fits TTMA recommended standards.

Valves are available with the following options: Stainless steel liners and shafts, grease fittings installed in the drive and bearing shafts, and "E" Coating of aluminum valves (recommended for aluminum valves used in water service).