Print Back

4" WET-R-DRI VLV AL/VT-B METERING   The manual Metering/Locking model provides an eight (8) position metering locking handle which holds the disc in the desired position.

Unit of Measure

Specifications

Style

N/A Metering

Package Type

N/A Each

Units Per Package

N/A 1

Size

N/A 4 "

Body Material

N/A Aluminum

Disc

N/A Viton®-B

Vendor Item #

N/A WD406ALVB

Manufacturer

N/A Betts

Weight

N/A 5.5 lb

Maximum Working Pressure

N/A 75 psi

Operating Temperature Range

N/A -40 to +240 ºF

Installation

N/A The Wet-R-Dri Valve may be mounted in any position with handle located for easy operation. Valve, as assembled, opens by turning handle 1/4 turn counter clockwise (right hand operation). If clockwise rotation is desired (left hand operation) please specify. Care should be taken when mounting valve to be sure the I.D. of adjoining flanges or pipe is large enough to allow disc of valve to open freely.

Qty Req'd for Discount

N/A 4

% Discount at Checkout

N/A 6 %

Warning

N/A Use only genuine Betts Industries Inc. replacement parts. Use of substitute parts can impair the proper functioning of the Wet-R-Dri Valve.

Note

N/A Standard drilling fits TTMA recommended standards.

Valves are available with the following options: Stainless steel liners and shafts, grease fittings installed in the drive and bearing shafts, and "E" Coating of aluminum valves (recommended for aluminum valves used in water service).