Print Back
  • Combination nipples and hose menders are recommended for low-pressure discharge and suction service for compatible liquids. They are not for compressible products such as air or nitrogen on sizes 1 1/4" and above.
  • Combination nipples and hose menders are not recommended for steam.
  • The working pressure may vary with the construction of the hose, the type of clamping system used and the application.
  • In accordance with the R.M.A. bulletin for oil suction and discharge hose, a coupled length of hose in any size, should be tested to 1 1/2" times the working pressure and held for fifteen minutes without leaking or coupling movement. For additional information and detailed instruction on testing procedures, see the Rubber Manufacturers Association (R.M.A.) handbook.
Unit of Measure

Specifications

Package Type

N/A Each

Units Per Package

N/A 1

Size

N/A 3/4 "

Body Material

N/A Stainless Steel

Manufacturer

N/A Campbell

Vendor Item #

N/A HASS3

Weight

N/A .20 lb

Qty Req'd for Discount

N/A 10

% Discount at Checkout

N/A 10 %