Catalog

Note: Not legal for DOT specification cargo tanks.
  • Light weight
  • Less maintenance
  • Low silhouette
The 16" Manhole is fabricated for lighter weight and greater strength. The advanced design has low silhouette and clean lines. Fill gasket will not pull out; is easily replaced. To compensate for wear, tension on fill cover is easily adjusted by adding shim washers. Hinge pins welded in place to prevent removal. Adequate means provided for use of seal wire. One outside clamping ring provides means for attaching cover to collar. Cover may be oriented throughout 360º. Secondary Latch is standard on all assemblies.

Manhole collars are available in aluminum, steel and stainless steel. Please see parts page for correct numbers. When welding collars to tank, care should be exercised to insure collar remains flat and round.
Unit of Measure

4/5

Unit
Discount Price / %
4   and up
5%

Package Type

N/A Each

Units Per Package

N/A 1

Size

N/A 16 "

Body Material

N/A 304 Stainless Steel

Vendor Item #

N/A FVA8016CXB

Weight

N/A 20.7 lb

Qty Req'd for Discount

N/A 4

% Discount at Checkout

N/A 5 %

Manufacturer

N/A Betts

N/A Manhole assemblies should be inspected with sufficient frequency and due regard to the products carried to insure a liquid tight closure. Any worn, damaged or missing parts must be replaced. Gaskets should be replaced if their effectiveness is impaired in any way. Replacement gaskets must be compatible with products carried. Adjustment due to gasket wear may be necessary to insure proper sealing of the 10" fill.

N/A Use only genuine Betts Industries Inc. replacement parts. Use of substitute parts can impair the proper functioning of this product.

N/A Not legal for DOT specification cargo tanks.