| Items |
 /Asset/BETTS WD201ALVB.png BETWD201ALB WD201ALB Price $91.71
|
/Asset/BETTS WD201ALVB.png BETWD201ALVB WD201ALVB Price $104.52
|
/Asset/BETTS WD201ALVB.png BETWD201ALVB001 WD201ALVB001 Price $134.16
|
 /Asset/BETTS WD206ALB.png BETWD206ALB WD206ALB Price $115.21
|
/Asset/BETTS WD206ALB.png BETWD206ALVB WD206ALVB Price $142.33
|
|||||
| Style | Standard Detent | Standard Detent | Standard Detent | Metering | Metering | |||||
| Package Type | Each | |||||||||
| Units Per Package | 1 | |||||||||
| Size | 2 " | |||||||||
| Body Material | Aluminum | Aluminum | Epoxy Coated Aluminum | Aluminum | Aluminum | |||||
| Disc | Buna-N | Viton®-B | Viton®-B | Buna-N | Viton®-B | |||||
| Vendor Item # | WD201ALB | WD201ALVB | WD201ALVB001 | WD206ALB | WD206ALVB | |||||
| Seal Material | Buna | Viton®-B | Viton®-B | Buna-N | Viton®-B | |||||
| Manufacturer | Betts | |||||||||
| Weight | 2.40 lb | |||||||||
| Warning | Use only genuine Betts Industries Inc. replacement parts. Use of substitute parts can impair the proper functioning of the Wet-R-Dri Valve. | |||||||||
| Note |
Standard drilling fits TTMA recommended standards. Valves are available with the following options: Stainless steel liners and shafts, grease fittings installed in the drive and bearing shafts, and "E" Coating of aluminum valves (recommended for aluminum valves used in water service). |
|||||||||
| Maximum Working Pressure | 75 psi | |||||||||
| Operating Temperature Range | -40 to +240 ºF | -40 to +240 ºF | -40 to +240 ºF | |||||||
| Outside Diameter | 3 3/4 " | |||||||||
| Inside Diameter | 2 1/4 " | |||||||||
| Dimension A | 6 3/4 " | |||||||||
| Dimension B | 4 1/4 " | |||||||||
| Dimension C | 1 1/8 " | |||||||||
| Flange B.C. | 3 3/4 " | |||||||||
| Flange Holes | 6 7/16 " | |||||||||
| Installation | The Wet-R-Dri Valve may be mounted in any position with handle located for easy operation. Valve, as assembled, opens by turning handle 1/4 turn counter clockwise (right hand operation). If clockwise rotation is desired (left hand operation) please specify. Care should be taken when mounting valve to be sure the I.D. of adjoining flanges or pipe is large enough to allow disc of valve to open freely. | |||||||||
| Qty Req'd for Discount | 4 | |||||||||
| % Discount at Checkout | 6 % | |||||||||
|
|
||||||||||
