Catalog

Request Information
Manual Shut-off Nozzle For High-Flow, Bulk Fuel Oil Delivery Service with Built-In Swivel and Check Valve

These are the premier nozzles in the fuel delivery industry. They are easily operated by hands of any size, have the best swivel, and through the years have been the least troblesome nozzles we sell.
Unit of Measure

Discount

Unit
Discount Price / %
3   and up
5%

Package Type

 N/A Each

Units Per Package

 N/A 1

Size

 N/A 1 1/2 "

Body Material

 N/A Aluminum

Seal Material

 N/A Viton®

Manufacturer

 N/A OPW Retail Fueling

Vendor Item #

 N/A 295SC-0141

Weight

 N/A 4.2 lb

Maximum Pressure

 N/A 50 psi

Stem Material

 N/A Stainless steel

Main Poppet Disc

 N/A Viton®

Stem Seal

 N/A Buna-N O-Ring

Spout

 N/A OPW 297 Aluminum (Optional)

Qty Req'd for Discount

 N/A 3

% Discount at Checkout

 N/A 5 %

N/A

  • Aluminum body - lighter weight, easier to maneuver.
  • Dual poppets - easy-to-open nozzle against high inlet pressures.
  • Replacement hold-open rack - one-hand control of hold-open mechanism means easy setting of flow speed. Nozzle must be attended at all times during usage.
  • Replaceable composite lever guard - easy, low-cost replacement.
  • Right angle design - provides larger lever area for better grip and easier control; permits nozzle to fit into awkward spaces close to walls and into corners.
  • Adjustable dash pot - permits adjusting the main poppet closure rate over a wide range of flows to overcome line shock with minimum afterflow.
  • Built-in swivel - eliminates twisting and kinking of the hose. This swivel is hard-coated aluminum and has full-bearing surfaces.
  • Built-in check valve - prevents hose drainage after pump is turned off.
  • Vinyl-coated lever - insulates fingers against cold.
  • Easily replaced spout - the spout is easily threaded into the body. Replacement spouts are readily available from OPW.
  • NPT female threads at inlet end - standard pipe threads accept all 1 1/4" or 1 1/2" male connections.
  • Design working pressure - OPW nozzles are designed to work at 50 PSI maximum pressure.