Betts Wet-R-Dri Butterfly Valves
Butterfly Valves
The Betts Wet-R-Dri valve is a lightweight and compact quarter turn in-line stop valve. This easily maintained and versatile valve is widely used for liquid, gaseous or dry products and is available in a variety of sizes. Listed are the most commonly used TTMA configurations in Standard Detent WDx01, Indexing WDx06, Air/Air actuated WDx17, and Air/Spring actuated WDx19, but many variations, including ASA flange mounting, are available. Epoxy coating, suffix 001, is recommended for water service, but is very popular all around as it extends the life of the valve. Please contact our parts department for more information.
Unit of Measure
Items |
/Asset/BETTS WD201ALVB.png BETWD201ALB WD201ALB Price $91.71
|
/Asset/BETTS WD201ALVB.png BETWD201ALVB WD201ALVB Price $104.52
|
/Asset/BETTS WD201ALVB.png BETWD201ALVB001 WD201ALVB001 Price $134.16
|
/Asset/BETTS WD206ALB.png BETWD206ALB WD206ALB Price $115.21
|
/Asset/BETTS WD206ALB.png BETWD206ALVB WD206ALVB Price $142.33
|
|||||
Style | N/A Standard Detent | N/A Standard Detent | N/A Standard Detent | N/A Metering | N/A Metering | |||||
Package Type | N/A Each | |||||||||
Units Per Package | N/A 1 | |||||||||
Size | N/A 2 " | |||||||||
Body Material | N/A Aluminum | N/A Aluminum | N/A Epoxy Coated Aluminum | N/A Aluminum | N/A Aluminum | |||||
Disc | N/A Buna-N | N/A Viton®-B | N/A Viton®-B | N/A Buna-N | N/A Viton®-B | |||||
Vendor Item # | N/A WD201ALB | N/A WD201ALVB | N/A WD201ALVB001 | N/A WD206ALB | N/A WD206ALVB | |||||
Seal Material | N/A Buna | N/A Viton®-B | N/A Viton®-B | N/A Buna-N | N/A Viton®-B | |||||
Manufacturer | N/A Betts | |||||||||
Weight | N/A 2.40 lb | |||||||||
Warning | N/A Use only genuine Betts Industries Inc. replacement parts. Use of substitute parts can impair the proper functioning of the Wet-R-Dri Valve. | |||||||||
Note |
N/A
Standard drilling fits TTMA recommended standards. Valves are available with the following options: Stainless steel liners and shafts, grease fittings installed in the drive and bearing shafts, and "E" Coating of aluminum valves (recommended for aluminum valves used in water service). |
|||||||||
Maximum Working Pressure | N/A 75 psi | |||||||||
Operating Temperature Range | N/A -40 to +240 ºF | N/A | N/A | N/A -40 to +240 ºF | N/A -40 to +240 ºF | |||||
Outside Diameter | N/A 3 3/4 " | |||||||||
Inside Diameter | N/A 2 1/4 " | |||||||||
Dimension A | N/A 6 3/4 " | |||||||||
Dimension B | N/A 4 1/4 " | |||||||||
Dimension C | N/A 1 1/8 " | |||||||||
Flange B.C. | N/A 3 3/4 " | |||||||||
Flange Holes | N/A 6 7/16 " | |||||||||
Installation | N/A The Wet-R-Dri Valve may be mounted in any position with handle located for easy operation. Valve, as assembled, opens by turning handle 1/4 turn counter clockwise (right hand operation). If clockwise rotation is desired (left hand operation) please specify. Care should be taken when mounting valve to be sure the I.D. of adjoining flanges or pipe is large enough to allow disc of valve to open freely. | |||||||||
Qty Req'd for Discount | N/A 4 | |||||||||
% Discount at Checkout | N/A 6 % | |||||||||
|