The Internal Chemical Hydraulic Valve is designed for use with a wide variety of chemicals. It is an internal self-closing stop valve, therefore it does not require under carriage crash protection. Available elbows are supplied with shear sections to meet 49CFR 178.345-8(a)(4). A heavy mounting flange is provided to insure a flat surface for a positive seal. A replaceable Teflon® seat and a replaceable stem are provided for ease in repairing a damaged valve.
The 1/8 NPT Hydraulic connection is located on the outside of the mounting flange. 1,500 psi minimum hydraulic line pressure is required to operate the valve, but do not exceed 4,000 psi hydraulic line pressure.
The 1/8 NPT Hydraulic connection is located on the outside of the mounting flange. 1,500 psi minimum hydraulic line pressure is required to operate the valve, but do not exceed 4,000 psi hydraulic line pressure.
Unit of Measure
Package Type |
N/A Each |
Units Per Package |
N/A 1 |
Manufacturer |
N/A Betts |
Vendor Item # |
N/A CH47003SST |
Weight |
N/A 31 lb |
