Catalog

Request Information
The Total Control Systems 700 series rotary flow meter was designed to measure liquids within the Adhesives, Agricultural, Aviation, Chemical, Food Processing, Paint, Petrochemical, Petroleum, Pharmaceutical, Printing, Textiles and other industries, requiring precise liquid measurement solutions.

Design

The TCS Model 700 series flow meter has a simple and efficient meter design consisting of a housing and three rotors that rotate in unison within the measuring chamber. The absence of wear, from no metal-to-metal contact inside the chamber, eliminates any deterioration in accuracy and provides a long service life. The rotors are supported by bearings inserted into two bearing plates, where at the end of each rotor shaft is a timing gear. The timed rotation between each rotor is then transferred through the calibration adjuster to the register, which will then give a consistent and superior measurement of accuracy
Unit of Measure

Package Type

 N/A Each

Units Per Package

 N/A 1

Manufacturer

 N/A Total Controls

Vendor Item #

 N/A TCS 700 Meter

Meter Types

 N/A SP - Standard Petroleum :Refined Petroleum Products; such as Gasoline, Fuel Oils, Diesel, Bio-Diesel, Vegetable Oils, Soy Oil, Kerosene, Motor Oils, Ethylene Glycol (Anti-Freeze), etc.

SPA - Standard Petroleum (Aviation) :- Refined Petroleum Products such as Aviation Gasoline, Jet Fuels, Gasoline, Fuel Oils, Diesel, Bio-Diesel, Kerosene, etc.

SPD - Standard Petroleum (Ductile Iron) :- Refined Petroleum Products such as Aviation Gasoline, Ethanol Blends, Methanol Blends, Bio-Diesel, Gasoline, Fuel Oils, Diesel, Kerosene, Vegetable Oils, Soy Oil, etc.

IP - Industrial Products :- Food Processing, Chemicals, General Solvents and many other liquids; such as Corn Syrup, Soy Bean Oil, Liquid Sugars, Shortenings, Latex Products, Adhesives, etc.

IC - Industrial Products (Carbon Bearings) :- Alcohols, Chemicals, Solvents, Water and many other Non- Lubricating Liquids; such as Acetones, Ethanol, Naphtha, Xylene, MEK, Toluene, Resins, etc.

AF - All Ferrous :- Pesticides, Fertilizers, Chemicals, Chlorinated Solvents, Agricultural Chemicals, Paints, Ink, Alkaline pH Latex Products, Adhesives, Liquid Feeds, etc.

SS - Stainless Steel :- Covers the same products as the SP, SPA, IP, IC and AF models but includes special handling liquids; such as Acids, Anti-Icing Fluids, Vinegar, Fruit Juices, etc.

N/A

  • Excellent Accuracy:
    5:1 - ± 0.1% of max. nominal rate
    10:1 - ± 0.125% of max. nominal rate
    15:1 - ± 0.15% of max. nominal rate
    Repeatability – 0.02% of rated flow
    (constant operating conditions with 700SP meters & mechanical registration, using 1 CPS test fluid)
  • Low-pressure drop
  • Advanced material of construction
  • Low maintenance
  • Long service life
  • Compact size & light weight design
  • Broad range of measurement applications
  • Right or left hand direction of flow
  • Full selection of meter accessories and electronic registration
  • Wide range of flow - up to 600 GPM (2271 LPM)
  • Wide viscosity range - up to 1,500,000 SSU (325,000 centipoise)
  • Meets NIST, USA military specifications and other international weights & measures accuracy requirements